Service should start between 9:00-9:01
Announcements
‣
‣
‣
‣
‣
Worship
‣
‣
‣
‣
‣
Communion Sunday
‣
‣
‣
‣
‣
Sermon
‣
‣
‣
‣
‣
‣
‣
End of Service
(Often low-level ambient music plays. This is ok for stream)
‣
‣
‣
‣
‣
‣
‣
‣
Set camera 2 (center camera to close-up on podium)
Set preview to "computer" source
Turn on DSK-1 and turn on TIE
Use "cut" to switch to the announcement slide. Show long enough to read the whole slide.
Monitor audio levels. You may need to raise audio levels if too low for announcers.
Turn off DSK-1
Set audio levels to 0.00
Set camera shot to get worship band.
Turn on Chroma Key to show lyrics.
Setup camera views and switch cameras using "auto" transition.
Turn off Chroma Key
Set camera 2 (center camera) close-up on podium.
Turn on DSK-1 (turn on TIE if communion slides will be shown)
Monitor audio levels. You may need to raise audio levels if too low.
When communion is finished, start with step 1 for Worship.
Turn off Chroma Key
Stop-start Denon audio recorder.
Set camera 2 (center camera) on podium close-up) - note camera 2 preset buttons
Set camera 1 and camera 3 to "podium side shot" presets.
Turn on DSK-1 and turn on TIE (while on camera shot, not slide)
Set preview to "computer" to follow slides
Use "cut" to switch to slide as needed throughout sermon.
Change preview from computer to Blk (black screen)
Follow sermon prayer on cameras
Once sermon finishes, use "auto" transition to black.
Mute audio on ATEM
On OBS computer: click on OUTRO to play outro video on stream.
Once outro video finishes, the full-screen Shiloh logo shows. Click Stop Stream
Turn off DSK-1 on ATEM
On Denon audio recorder, click Stop recording. (Click multiple times if stop button is still lit)