Have the screens behind the drums on the Shiloh slide!
‣
1) Start After-Service Aesthetics
Meaning to create a comfortable atmosphere and review any announcements or information. This involves playing music, and displaying helpful slides for the congregation as they’re on their way out.
‣
Immediately after the message when people are leaving, play the Pre-Roll slides on auto-advance
Go to “5-Min Countdown” tab and click on the first slide
FYI: The slide will then loop through the available slides in this tab in 15 sec intervals. Leave this on loop.
‣
Set the screens behind the drums to the Shiloh slide
Go to “Shiloh Back wall” tab and click on the slide that says “Shiloh: Know God, Find Freedom, Discover Purpose, Make a Difference”
FYI: This will pull up the graphic on the 2 small/back wall TV’s on stage
The only way to remove this graphic and return to one of the motion backgrounds for worship is to first press the “F1” key, which blacks out all TV’s. Once you do this then you can select the motion background you would like for the worship set.
‣
Have some music from Spotify playing if prompted to (check with the preacher in advance) And make sure to be mindful of the room when you select what music to play. If people are being ministered to, choose a song that fits with the moment rather than some upbeat pop music.
Go to Spotify and select the Pre-Service, ALTAR CALLS, or Quiet Prayer playlist
You could select a song, hit the playlist play button, or start the playlist on shuffle play
Communicate with the sound engineer that you have the music playing
‣
2) Close Shop - Around 10 Minutes After Service Ends
Meaning to shut everything down and be good stewards of what God has blessed our church with. This involves closing apps, turning off TVs, cleaning the sound booth, and shutting of the breakers.
‣
Close ProPresenter and any other open programs
Right-Click the ProPresenter icon and hit quit.
The shortcut for this is “Command + Q”
‣
Leave Mac turned on (enables remote access)
The screen should be blank.
‣
Turn off stage TVs and TV above sound booth
Main (3) TV’s
Point the “AQUOS - SHARP” remote at the 3 receivers next to the “ASUS” computer and press the power button
The TV’s will take a few moments to turn on so don’t worry if it takes 10-15 seconds
TV behind the AV booth
Point the “AQUOS - SHARP” remote at the TV behind you and press the power button
Small/Lower/Back Wall (2) TV’s
Point the SAMSUNG remote (the one with 2 red power buttons on the top of the remote) at the TV’s and press the power button on the top right of the remote
‣
Turn off the breakers and the speaker’s switch
‣
Location of the breaker and switch
On the wall at the far end of the sound booth
Flick all the switches to the left.
Flick the speaker switch down.
‣
Throw away any papers (services plan, message notes, etc.)
The trash can is usually located in the far corner closest to the wall